bzwrite
This is the Japanese calendar in a basic formation of php..
<?php
function JapaneseCalendar($unix_time, $gmt,
$monthsystem = 0) {
$months[0]['name'] = array(
'ichigatsu','nigatsu','sangatsu',
'shigatsu','gogatsu','rokugatsu',
'shichigatsu','hachigatsu','kugatsu',
'jūgatsu','jūichigatsu','jūnigatsu');
$months[0]['cause'] = array(
'first month',
'second month',
'third month',
'forth month',
'fifth month',
'six month',
'seventh month',
'eighth month',
'ninth month',
'tenth month',
'elventh month',
'twelve month');
$months[1]['name'] = array(
'mutsuki','kinusaragi','yayoi',
'uzuki','satsuki','minatsuki',
'fumizuki','hazuki','nagatsuki',
'kaminazuki','shimotsuki','shiwasu');
$months[1]['cause'] = array(
'affection month',
'changing clothes',
'new life',
'u-no-hana month',
'fast month',
'month of water',
'book month',
'leaf month',
'long month',
'month of gods',
'frost month',
'priests run');
$days['roman'] = array(
'nichiyōbi','getsuyōbi','kayōbi',
'suiyōbi','mokuyōbi','kin\'yōbi','doyōbi');
$days['element'] =
array('Sun','Moon','Fire','Water',
'Wood','Gold','Earth');
$days['day'] = array(
'tsuitachi','futsuka','mikka','yokka',
'itsuka','muika','nanoka','yōka',
'kokonoka','tōka','jūichinichi',
'jūninichi','jūsannichi','jūyokka',
'jūgonichi','jūrokunichi',
'jūshichinichi','jūhachinichi',
'jūkunichi','hatsuka',
'nijūichinichi','nijūninichi',
'nijūsannichi','nijūyokka',
'nijūgonichi','nijūrokunichi',
'nijūshichinichi','nijūhachinichi',
'nijūkunichi','sanjūnichi',
'sanjūichinichi');
return array("date"=>$days['roman'][date('w', $unix_time)].' '.
$days['day'][date('d', $unix_time)-1].' '.
$months[$monthsystem]['name'][date('n', $unix_time)-1].
' '.date('Y', $unix_time),"cause" =>
$days['element'][date('w', $unix_time)].
' '.$months[$monthsystem]['cause'][date('n', $unix_time)-1],
"time" => date('h:i:s A', $unix_time));
}
?>
When I first ran this routine, I was referencing $month not $months, and for some reason it was still returning the month but not the cause, but the variable didn't exist. I found this odd around this time. I didn't know what would cause my RSS Feed to display the month even when there was no variable referred to the data.
달력 함수
소개
이 달력(calendar) 확장은 서로 다른 달력 형태를 변환시켜 주는 함수들을 제공한다. 율리우스 날짜수(Julian Day Count)에 기반하여 변환이 된다. 율리우스 날짜수은 율리우스 1세, 4713 B.C. 부터 지난 날짜수가 된다. 달력 시스템 사이의 변환을 위해서는, 먼저 율리우스 날짜수으로 변환해야 하고, 그 다음에 원하는 달력 시스템으로 변환하는것이다. 율리우스 날짜수는 율리우스력(Julian Calendar)와는 매우 다른것이다! 율리우스 날짜수(Julian Day Count)에 대해 더 많은 정보를 얻고 싶으면 » http://www.hermetic.ch/cal_stud/jdn.htm를 방문한다. 날짜 시스템에 관한 더 많은 정보를 원하면 » http://www.fourmilab.ch/documents/calendar/를 방문한다. 이 설명서중에서는 위의 페이지에서 발취한 내용을 ""로 둘러 싸고 있다.
설치
이 함수들를 작동시키기 위해서는, PHP를 컴파일할때 --enable-calendar 옵션을 써야 한다.
PHP 윈도우 버전에서는 이 확장에 대한 지원이 포함되어 있습니다. 이 함수들을 이용하기 위해서 추가로 확장을 읽어들일 필요가 없습니다.
실행시 설정
이 확장은 php.ini 설정이 존재하지 않습니다.
자원형
이 확장은 리소스형을 정의하지 않습니다.
예약 상수
이 확장은 다음의 상수들을 정의합니다. 이 확장을 PHP에 내장했거나, 실행시에 동적으로 읽어들일 경우에만 사용할 수 있습니다.
- CAL_GREGORIAN (integer)
- CAL_JULIAN (integer)
- CAL_JEWISH (integer)
- CAL_FRENCH (integer)
- CAL_NUM_CALS (integer)
- CAL_DOW_DAYNO (integer)
- CAL_DOW_SHORT (integer)
- CAL_DOW_LONG (integer)
- CAL_MONTH_GREGORIAN_SHORT (integer)
- CAL_MONTH_GREGORIAN_LONG (integer)
- CAL_MONTH_JULIAN_SHORT (integer)
- CAL_MONTH_JULIAN_LONG (integer)
- CAL_MONTH_JEWISH (integer)
- CAL_MONTH_FRENCH (integer)
The following constants are available since PHP 4.3.0 :
- CAL_EASTER_DEFAULT (integer)
- CAL_EASTER_ROMAN (integer)
- CAL_EASTER_ALWAYS_GREGORIAN (integer)
- CAL_EASTER_ALWAYS_JULIAN (integer)
The following constants are available since PHP 5.0.0 :
Table of Contents
- cal_days_in_month — Return the number of days in a month for a given year and calendar
- cal_from_jd — Converts from Julian Day Count to a supported calendar
- cal_info — Returns information about a particular calendar
- cal_to_jd — Converts from a supported calendar to Julian Day Count
- easter_date — Get Unix timestamp for midnight on Easter of a given year
- easter_days — Get number of days after March 21 on which Easter falls for a given year
- FrenchToJD — Converts a date from the French Republican Calendar to a Julian Day Count
- GregorianToJD — Converts a Gregorian date to Julian Day Count
- JDDayOfWeek — Returns the day of the week
- JDMonthName — Returns a month name
- JDToFrench — Converts a Julian Day Count to the French Republican Calendar
- JDToGregorian — Converts Julian Day Count to Gregorian date
- jdtojewish — Converts a Julian day count to a Jewish calendar date
- JDToJulian — Converts a Julian Day Count to a Julian Calendar Date
- jdtounix — Convert Julian Day to Unix timestamp
- JewishToJD — Converts a date in the Jewish Calendar to Julian Day Count
- JulianToJD — Converts a Julian Calendar date to Julian Day Count
- unixtojd — Convert Unix timestamp to Julian Day
add a note
User Contributed NotesCalendar
simon at chronolabs dot org dot au
17-Jun-2008 05:09
17-Jun-2008 05:09
simon at chronolabs dot org dot au
20-Nov-2007 05:20
20-Nov-2007 05:20
<?php
// You need to replace this section in Function EgyptianCalendar
// As well as Function MayanTihkalCalendar
$revolutionsperyear = $ttl_num / $i;
$numyears = floor((ceil($roun) / $revolutionsperyear));
$avg_num_month = $ttl_num_months/$i;
$jtl = abs(abs($roun) - ceil($revolutionsperyear*($numyears+1)));
while($month==0){
$day=0;
$u=0;
foreach($monthusage as $key => $item){
$t=0;
foreach($item as $numdays){
$t++;
$tt=0;
for($sh=1;$sh<=$numdays;$sh++){
$ii=$ii+1;
$tt++;
if ($ii==floor($jtl)){
if ($roun<0){
$daynum = $tt;
$month = $t;
} else {
$daynum = $numdays-($tt-1);
$month = $avg_num_month-($t-1);
}
$sequence = $key;
$nodaycount=true;
}
}
if ($nodaycount==false)
$day++;
}
$u++;
}
}
?>
This section of code need to be changed in the calculation I noticed today in our RounCalendar we had a zero day this function will calculate the month and day correctly for the calendars, it is a pretty universe piece of code, I am sorry it wasn't properly tested and need some refactoring.
simon at chronolabs dot org dot au
10-Nov-2007 04:44
10-Nov-2007 04:44
This is the egyptian calendar which was the first 365 day calendar on the planet it has no leap year which makes it a little inaccurate but you can work on your own implementation of this code when you like, this is another implementation of the roun floating point code which is a universal code for generating date codec's you can make practically all calendars with this code the $pweight is based on my research on carbon date stamping etc of when egypt epoch or PPO was made, some people argue a few thousand years while other can date egypts epoch being around 30000 years ago!! This is on the basis of tidal marking on statues and momuments when the are was covered in water after construction from sea level rising.
<?php
print_r(EgyptCalendar(time(),0));
function EgyptianCalendar($unix_time, $gmt,
$poffset = '1970-02-26 7:45 PM',
$pweight = '-9777600.22222222223',
$defiency='nonedeficient',
$timeset= array("hours" => 24,
"minutes" => 60,
"seconds" => 60))
{
// Code Segment 1 – Calculate Floating Point
$tme = $unix_time;
if ($gmt>0){$gmt=-$gmt;} else {$gmt=abs($gmt);}
$ptime = strtotime($poffset)+(60*60*gmt);
$weight = $pweight+(1*gmt);
$egypt_xa = ($tme)/(24*60*60);
$egypt_ya = $ptime/(24*60*60);
$egypt = (($egypt_xa -$egypt_ya) -
$weight)+(microtime/999999);
// Code Segment 2 – Set month day arrays
$nonedeficient = array(
"seq1" => array(30,30,30,30,30,30,30,30,30,30,30,30,5));
$monthnames = array(
"seq1" => array('Thoth','Phaophi','Athyr','Choiak',
'Tybi', 'Mecheir','Phamenoth','Pharmuthi','Pachon',
'Payni','Epiphi','Mesore','epagomenai'));
$monthusage = isset($defiency) ? ${$defiency} : $deficient;
// Code Segment 3 – Calculate month number, day number
foreach($monthusage as $key => $item){
$i++;
foreach($item as $numdays){
$ttl_num=$ttl_num+$numdays;
$ttl_num_months++;
}
}
$revolutionsperyear = $ttl_num / $i;
$numyears = egyptd((floor($egypt) / $revolutionsperyear),0);
$avg_num_month = $ttl_num_months/$i;
$jtl = abs(abs($egypt) -
ceil($revolutionsperyear*($numyears+1)));
while($month==0){
$day=0;
$u=0;
foreach($monthusage as $key => $item){
$t=0;
foreach($item as $numdays){
$t++;
$tt=0;
for($sh=1;$sh<=$numdays;$sh++){
$ii=$ii+1;
$tt++;
if ($ii==floor($jtl)){
if ($egypt>0){
$daynum = $tt;
$month = $t;
} else {
$daynum = $numdays-$tt;
$month = $avg_num_month-$t;
}
$sequence = $key;
$nodaycount=true;
}
}
if ($nodaycount==false)
$day++;
}
$u++;
}
}
//$numyears = abs($numyears);
$timer = substr($egypt, strpos($egypt,'.')+1,
strlen($egypt)-strpos($egypt,'.')-1);
$egypt_out= $numyears.'/'.$month.'/'.$daynum.' '.$day.'.'.
floor(intval(substr($timer,0,2))/100*$timeset['hours']).':'.
floor(intval(substr($timer,2,2))/100*$timeset['minutes']).':'.
floor(intval(substr($timer,4,2))/100*$timeset['seconds']).'.'.
substr($timer,6,strlen($timer)-6);
$egypt_obj = array('year'=>$numyears,
'month'=>$month,
'mname' => $monthnames[$sequence][$month-1],
'day'=>$daynum,
'jtl'=>$jtl,
'day_count'=>$day,
'hours'=>floor(intval(substr($timer,0,2))/100
*$timeset['hours']),
'minute'=>floor(intval(substr($timer,2,2))/100
*$timeset['minutes']),
'seconds'=>floor(intval(substr($timer,4,2))/100
*$timeset['seconds']),
'microtime'=>substr($timer,6,strlen($timer)-6),
'strout'=>$egypt_out);
return $egypt_obj;
}
?>
btw in my previous post of the Mayan Tikal calendar the top part of the function was chopped off in my code cut and paste that is the line for the function which looks like, the top 3 line will need to be replace with:
<?php
print_r(MayanTikalCalendar(time(),0));
function MayanTikalCalendar($unix_time, $gmt,
?>
simon at chronolabs dot org dot au
08-Nov-2007 10:27
08-Nov-2007 10:27
Well this is the second part, well more the second calendar of Maya the Tikal there is two of them one for long count, one for general date seeding, this is using an implementation of floating point time (roun).
<?php
$maya = MayanTikalCalendar(time(),0);
print_r($maya);
$poffset = '2012-12-21 8:24 PM',
$pweight = '-1872000.22222222223',
$defiency='nonedeficient',
$timeset= array("hours" => 24,
"minutes" => 60,
"seconds" => 60))
{
// Code Segment 1 – Calculate Floating Point
$tme = $unix_time;
if ($gmt>0){ $gmt=-$gmt; } else { $gmt=abs($gmt); }
$ptime = strtotime($poffset)+(60*60*gmt);
$maya_xa = ($tme)/(24*60*60);
$maya_ya = $ptime/(24*60*60);
$maya = (($maya_xa -$maya_ya) - $pweight)+(microtime/999999);
// Code Segment 2 – Set month day arrays
$nonedeficient = array(
"seq1" => array(20,20,20,20,20,20,20,20,20,
20,20,20,20,20,20,20,20,20,5));
$monthnames = array("seq1" => array(
'Pop', 'Uo', 'Zip', 'Zot\'z', 'Tzec', 'Xul',
'Yaxkin', 'Mol', 'Ch\'en', 'Yax', 'Zac', 'Ceh',
'Mac', 'Kankin', 'Muan', 'Pax', 'Kayab',
'Cumku', 'Uayeb'));
$daynames = array("seq1" => array(
'Imix', 'Ik', 'Akbal', 'Kan', 'Chicchan',
'Cimi','Manik', 'Lamat', 'Muluc', 'Oc',
'Chuen', 'Eb', 'Ben', 'Ix', 'Men',
'Cib', 'Caban', 'Etz\'nab', 'Cauac', 'Ahau'));
$monthusage = isset($defiency) ? ${$defiency} : $deficient;
// Code Segment 3 – Calculate month number, day numbers etc
foreach($monthusage as $key => $item){
$i++;
foreach($item as $numdays){
$ttl_num=$ttl_num+$numdays;
$ttl_num_months++;
}
}
$revolutionsperyear = $ttl_num / $i;
$numyears = (round((floor($maya) / $revolutionsperyear),0));
$avg_num_month = $ttl_num_months/$i;
$jtl = abs(abs($maya) -
ceil($revolutionsperyear*($numyears+1)));
while($month==0){
$day=0;
$u=0;
foreach($monthusage as $key => $item){
$t=0;
foreach($item as $numdays){
$t++;
$tt=0;
for($sh=1;$sh<=$numdays;$sh++){
$ii=$ii+1;
$tt++;
if ($ii==floor($jtl)){
if ($maya>0){
$daynum = $tt;
$month = $t;
} else {
$daynum = $numdays-$tt;
$month = $avg_num_month-$t;
}
$sequence = $key;
$nodaycount=true;
}
}
if ($nodaycount==false)
$day++;
}
$u++;
}
}
$timer = substr($maya, strpos($maya,'.')+1,
strlen($maya)-strpos($maya,'.')-1);
$maya_out= $numyears.'/'.$month.'/'.$daynum.' '.$day.'.'.
floor(intval(substr($timer,0,2))/100*$timeset['hours']).':'.
floor(intval(substr($timer,2,2))/100*$timeset['minutes']).':'.
floor(intval(substr($timer,4,2))/100*$timeset['seconds']).'.'.
substr($timer,6,strlen($timer)-6);
$maya_obj = array(
'longcount'=>MayanLongCount($tme),'year'=>abs($numyears),
'month'=>$month, 'mname' => $monthnames[$sequence][$month-1],
'day'=>$daynum, 'dayname'=>$daynames[$sequence][$daynum-1],
'day'=>$daynum, 'jtl'=>$jtl, 'day_count'=>$day,
'hours'=> floor(intval(substr($timer,0,2))/100
*$timeset['hours']),
'minute'=> floor(intval(substr($timer,2,2))/100
*$timeset['minutes']),
'seconds'=>floor(intval(substr($timer,4,2))/100
*$timeset['seconds']),
'microtime'=>substr($timer,6,strlen($timer)-6),
'strout'=>$maya_out);
return $maya_obj;
}
?>
simon at chronolabs dot org dot au
08-Nov-2007 03:00
08-Nov-2007 03:00
This will return the mayan long count calendar which cycle reaches 13.0.0.0.0 in 2012, I have had to compress the changemaya function for this code library so if you want to space it out your more than welcome. It works with unix time. To call the routine use the following syntax. The mayan calendar is a day count that is around 5000 years old, it tracks our cestial position in the galaxy
<?php
echo MayanLongCount(time());
function MayanLongCount($tme){
$config = array('ppo' => array(13,0,0,0,0),
'epoch' => strtotime('2012-12-21'));
$diff=(($tme-$config['epoch'])/(60*60*24));
$ppo = changemaya($config['ppo'],ceil($diff));
return $ppo[0].'.'.$ppo[1].'.'.$ppo[2].'.'.$ppo[3].'.'.$ppo[4];
}
function changemaya($ppo,$diff){
if ($diff>0) { $amount=1; } else { $amount=-1; }
for ($sh=1;$sh<abs($diff);$sh++){ if ($ppo[4]+$amount>20){
if ($ppo[3]+$amount>20){ if ($ppo[2]+$amount>20){
if ($ppo[1]+$amount>20){ if ($ppo[0]+$amount>20){
$ppo[0]=0; $ppo[1]=0; $ppo[2]=0; $ppo[3]=0; $ppo[4]=0;
} else { $ppo[1]=0; $ppo[0]=$ppo[0]+$amount;}
} else { $ppo[2]=0; $ppo[1]=$ppo[1]+$amount; }
} else {$ppo[3]=0; $ppo[2]=$ppo[2]+$amount; }
} else { $ppo[4]=0; $ppo[3]=$ppo[3]+$amount; }
} elseif ($ppo[4]+$amount<0){ if ($ppo[3]+$amount<0){
if ($ppo[2]+$amount<0){ if ($ppo[1]+$amount<0){
if ($ppo[0]+$amount<0){ $ppo[0]=20; $ppo[1]=0;
$ppo[2]=0; $ppo[3]=0; $ppo[4]=0;
} else { $ppo[1]=20; $ppo[0]=$ppo[0]+$amount; }
} else { $ppo[2]=20; $ppo[1]=$ppo[1]+$amount; }
} else { $ppo[3]=20; $ppo[2]=$ppo[2]+$amount; }
} else { $ppo[4]=20; $ppo[3]=$ppo[3]+$amount; }
} else { $ppo[4]=$ppo[4]+$amount;}}
return $ppo;
}
?>
Thanks!!
Martin Lindhe
27-Sep-2007 09:08
27-Sep-2007 09:08
To calculate NTP timestamp from unix timestamp:
<?
function ntptime()
{
return 2208988800 + time();
}
?>
NTP timestamps are represented as a 64-bit unsigned fixed-
point number, in seconds relative to 0h on 1 January 1900.
schotm29 at hotmail dot com
07-Sep-2007 10:00
07-Sep-2007 10:00
fRay Fergusons light reimplimentation doesn't work all of the time, because of the inaccuracy in the calculations (it is quite accurate but not accurate enough for a live web app)
david dot scourfield at llynfi dot co dot uk
17-Aug-2007 07:13
17-Aug-2007 07:13
I created this function a while ago and needed it again recently, so had to trawl through some old files to find it. Thought I'd post it here in case anyone else finds it useful.
<?php
/*
* Function to calculate which days are British bank holidays (England & Wales) for a given year.
*
* Created by David Scourfield, 07 August 2006, and released into the public domain.
* Anybody may use and/or modify this code.
*
* USAGE:
*
* array calculateBankHolidays(int $yr)
*
* ARGUMENTS
*
* $yr = 4 digit numeric representation of the year (eg 1997).
*
* RETURN VALUE
*
* Returns an array of strings where each string is a date of a bank holiday in the format "yyyy-mm-dd".
*
* See example below
*
*/
function calculateBankHolidays($yr) {
$bankHols = Array();
// New year's:
switch ( date("w", strtotime("$yr-01-01 12:00:00")) ) {
case 6:
$bankHols[] = "$yr-01-03";
break;
case 0:
$bankHols[] = "$yr-01-02";
break;
default:
$bankHols[] = "$yr-01-01";
}
// Good friday:
$bankHols[] = date("Y-m-d", strtotime( "+".(easter_days($yr) - 2)." days", strtotime("$yr-03-21 12:00:00") ));
// Easter Monday:
$bankHols[] = date("Y-m-d", strtotime( "+".(easter_days($yr) + 1)." days", strtotime("$yr-03-21 12:00:00") ));
// May Day:
if ($yr == 1995) {
$bankHols[] = "1995-05-08"; // VE day 50th anniversary year exception
} else {
switch (date("w", strtotime("$yr-05-01 12:00:00"))) {
case 0:
$bankHols[] = "$yr-05-02";
break;
case 1:
$bankHols[] = "$yr-05-01";
break;
case 2:
$bankHols[] = "$yr-05-07";
break;
case 3:
$bankHols[] = "$yr-05-06";
break;
case 4:
$bankHols[] = "$yr-05-05";
break;
case 5:
$bankHols[] = "$yr-05-04";
break;
case 6:
$bankHols[] = "$yr-05-03";
break;
}
}
// Whitsun:
if ($yr == 2002) { // exception year
$bankHols[] = "2002-06-03";
$bankHols[] = "2002-06-04";
} else {
switch (date("w", strtotime("$yr-05-31 12:00:00"))) {
case 0:
$bankHols[] = "$yr-05-25";
break;
case 1:
$bankHols[] = "$yr-05-31";
break;
case 2:
$bankHols[] = "$yr-05-30";
break;
case 3:
$bankHols[] = "$yr-05-29";
break;
case 4:
$bankHols[] = "$yr-05-28";
break;
case 5:
$bankHols[] = "$yr-05-27";
break;
case 6:
$bankHols[] = "$yr-05-26";
break;
}
}
// Summer Bank Holiday:
switch (date("w", strtotime("$yr-08-31 12:00:00"))) {
case 0:
$bankHols[] = "$yr-08-25";
break;
case 1:
$bankHols[] = "$yr-08-31";
break;
case 2:
$bankHols[] = "$yr-08-30";
break;
case 3:
$bankHols[] = "$yr-08-29";
break;
case 4:
$bankHols[] = "$yr-08-28";
break;
case 5:
$bankHols[] = "$yr-08-27";
break;
case 6:
$bankHols[] = "$yr-08-26";
break;
}
// Christmas:
switch ( date("w", strtotime("$yr-12-25 12:00:00")) ) {
case 5:
$bankHols[] = "$yr-12-25";
$bankHols[] = "$yr-12-28";
break;
case 6:
$bankHols[] = "$yr-12-27";
$bankHols[] = "$yr-12-28";
break;
case 0:
$bankHols[] = "$yr-12-26";
$bankHols[] = "$yr-12-27";
break;
default:
$bankHols[] = "$yr-12-25";
$bankHols[] = "$yr-12-26";
}
// Millenium eve
if ($yr == 1999) {
$bankHols[] = "1999-12-31";
}
return $bankHols;
}
/*
* EXAMPLE:
*
*/
header("Content-type: text/plain");
$bankHolsThisYear = calculateBankHolidays(2007);
print_r($bankHolsThisYear);
?>
Will output this result:
Array
(
[0] => 2007-01-01
[1] => 2007-04-06
[2] => 2007-04-09
[3] => 2007-05-07
[4] => 2007-05-28
[5] => 2007-08-27
[6] => 2007-12-25
[7] => 2007-12-26
)
fRay Ferguson
21-Apr-2006 11:32
21-Apr-2006 11:32
The following is a light reimplimentation of some of these functions wich can be used in an include file to work around the lack of --with-calendar in php implimentations.
<?php
/* IMPLEMENTS SUBSET OF PHP CALENDAR FUNCTIONS ON SYSTEMS COMPILED W/O --enable-calendar */
if (!function_exists('cal_days_in_month')){
function